Saturday 17th June - GBS Cars & Coffee event sponsored by Yokohama Tyres...

Saturday 17th June

We are excited to share with you all that we have now confirmed the date for the next GBS Cars & Coffee event of 2023, which is proudly sponsored by Yokohama Tyres and will be taking place on Saturday 17th June at GBS from 10am-2pm.

As many of you know everyone at GBS has a strong passion for cars and anything to do with motorsport and we love our Cars & Coffee events and Track Days etc and we all love to host our Cars & Coffee days which are getting busier and attracting a variety of sports cars each time we host one.

After working with and stocking Yokohama Tyres for several years now and supplying them on our parts website and shop Kit Spares we are delighted that they are joining us at our next GBS Cars & Coffee event.

Yokohama Tyres-
On the day one of the sales team from Yokohama will be joining us, you can see more about Yokohama on their website. Please click here for more details.

The GBS Cars & Coffee event at GBS was created in 2016 and has since been a massive success & we have continued to hold the event again for several years. Its an event that we have created that gives the chance for you all to have a ride out in your sports cars / meeting point and enjoy a coffee (plus biscuits/ cake of course) and chat about your cars, all are welcome to join us in any car (modern or classic including bikes). Everyone is welcome to join us in any car!
Another great thing about our GBS Cars & Coffee events are that we raise more money for two great charities…. We collect for the Notts & Lincs Air Ambulance & Cancer Research, and will be collecting on the day. Refreshments are free and all we ask for is a donation to our chosen charities.

The Kit Spares shop and showroom ( www.kitspares.co.uk ) will be open on the day. Please feel free to call us or email and pre order and parts, ready to collect on the day to avoid any delays.

All of the GBS and Yokohama Team look forward to seeing you and welcoming you to GBS on Saturday 17th June.

ALL CARS ARE WELCOME TO JOIN US…..

MOVE COMPLETE - All elements of our production are now under one roof.....

As you know earlier this year we announced that we are expanding with the doubling of our current site here in Nottinghamshire with the purchase of premises and the adjoining site. After a busy start to the year and two very busy months we are now pleased to have all the GBS team and all elements of our production under the one roof and now back up and running to full production.
A lot of planning and preparation went into the move to reduce the down time of production in our manufacturing department. The move went smoothly and was completed earlier this month, all machines are in and we were back up and running with Zeros chassis and components back in full production few weeks ago, with the first Zero coming out the jig in our new Manufacturing department two weeks ago.

With all the team and production under one roof, we now have the room to grow and expand our business in the future. We are pleased to share with you below some behind the scenes photographs of our new manufacturing department and we will be sharing a full factory tour video with you very soon. We would also like to thank everyone who has helped and supported us during this move and enabling us to make it happen, its looking like 2023 is going to be another busy and exciting year for us all.

Thank you for joining us at our first GBS Cars & Coffee event of 2023.....

Big thank you to everyone who joined us last Saturday (18th March) at GBS for our first Cars and Coffee event of 2023…….They just get better and better each time we hold our GBS Cars & Coffee events, and what a fantastic day we had with a car park full of sports cars, even the rain held off for the morning. We would like to say a big THANK YOU to you all for joining us and helping us make it such a great event and enjoyable day, its always nice to see so many Zero’s together in the car park along with a wide variety of other cars. The gates opened at 10am and by 10.30am the car park was already getting full.

The GBS and Kit Spares show room was very busy with people and the Kit Spares   was also very busy with sales and enquires. As usual the cakes attracted a lot of attention and certainly went down well with not many left along with the unlimited supply of tea and coffee. We would also like to thank A-Plan Insurance for sponsoring and supporting our event, you can see more about their insurance they offer on our Insurance page.

Another great thing about our GBS Cars & Coffee events that we love, is that we are able to raise money for our 2 chosen charities which are the Cancer Research UK and The Lincs & Notts Air Ambulance, we all feel and hope you agree that The Lincs & Notts Air Ambulance is a fantastic service and has helped & will continue to help many people, as well as the Cancer Research UK that is again a fantastic charity that makes a big difference to so many people and their families.
The next GBS Cars & Coffee date will be announced next week.

---

Join us at our next GBS Cars & Coffee event…..

GBS Track Day is confirmed, will you be joining us in your Zero?

The first GBS Track Day of 2023 is happening on Saturday 29th April at Blyton Park and the GBS team would like to invite you all to join in your Zero’s.

Its on the outer circuit of Blyton Park which is 1.5 miles and an open pit lane, starting at 9am and finishing at 5pm you will be guaranteed to get lots of laps in. We can’t wait and hope you can all join us and enjoy the day with us. We will be there with the Zero’s which we will be offering passenger rides with one of the GBS team. Passenger passes can all be purchased on the day with Javelin Track Days along with Helmet hire too.

More details about this GBS Track Day can be found on our event page with a link of where to book your place. We recommend that you book soon to avoid disappointment as this is likely to get booked up quite quickly.

We look forward to seeing you there!

The Zero can be seen at this years Kit Cars Shows.....

We are pleased to confirm that the GBS team can be seen with the Zeros at the Malvern Kit Car Show and the Newark Kit Car Show later this year.

The National Kit & Sports Car Show at Malvern, Worcestershire is taking place on Saturday 3rd June and Sunday 4th June and the Newark Kit Car Show is happening on Saturday 22nd July and Sunday 23rd July at the Newark Showground.

We will confirm nearer the time what Zeros can be seen on our stand along with a range of parts and spares from both Kit Spares and ATR Products.

We have also reserved a GBS Owners area for Zero owners to all park together at both shows like previous years, details on this will be released soon on our event page.

Visit our GBS event page for more details about these events. The next event on the GBS Calendar is our GBS cars & Coffee event which is happening this Saturday 18th March at GBS - All cars are welcome to join us, gates open at 10am. #GBSCarsandcoffee

Contact us today to discuss your Zero Self Build…..

Zero powered by a 2.5 Duratec engine goes to Rolling Road.....

GBS Zero goes to rolling road…. This GBS Zero which many of you may have seen last year on our stand at various shows and events was back with us last month for an engine upgrade and then Rolling Road.

The 2.5 Duratec engine on ATR Throttle Bodies with a Life ECU was with us for development on a new cam, rods and pistons upgrade, then taken to Rolling Road where we were testing the trumpet and inlet extension tubes. The Rolling Road map session made 252 bhp which the customer was very pleased with and is now ready to start enjoying more miles in his Zero this year, and will hopefully be joining us on Saturday 18th March at our GBS Cars & Coffee event. (See more details on our event page)

If you are interested in booking your car in with us for any upgrades, rolling road or any other of our workshop services then get in touch.

Not long until our first GBS Cars & Coffee event of the year....

ALL CARS ARE WELCOME….

Not long now until our first GBS Cars & Coffee event of the year which is proudly sponsored by A-Plan Insurance that is happening on Saturday 18th March at GBS. All cars are welcome to join us, and we are pleased to hear already that many of you are planning to join us in your Zeros and other sports cars.
Like all our Cars & Coffee events we will be offering free refreshments on the day, but ask for donations to help raise more money for two great charities…. We will be collecting for the Notts & Lincs Air Ambulance & Cancer Research.

The Kit Spares shop and showroom (www.kitspares.co.uk ) will be open on the day. Thank you to those that have already pre ordered items to collect on the day, please feel free to call us or email and pre order so they can be prepared and ready for you to collect on the day to avoid any delays as it can often be busy. For more details about the event and to let us know you are joining us please visit our event page.

All the GBS and A-Plan team look forward to seeing you and welcoming you to GBS on Saturday 18th March.

The new GBS Manufacturing department is well underway - All elements of our production will soon be under one roof.....

Earlier this year we announced that we are expanding with the doubling our current site here in Nottinghamshire with the purchase of premises and the adjoining site. 
Since getting the keys just before Christmas we have all been extremely busy getting the new facilities ready. We are pleased to share with you an update and some behind the scenes photographs of how it is going as we are now very close to having all of our production under one roof. A lot of planning and preparation has gone into the move to reduce the down time of our production in our manufacturing department. This move has given us room to grow and expand our business and is allowing us to bring all elements of our production under one roof. We look forward to sharing with you more photographs and videos next month of the new department up and running.

We are not exhibiting at this years Race Retro Show that is happening this weekend. But we look forward to seeing you all next month at our GBS Cars & Coffee event that is happening on Saturday 18th March at GBS. More details can be found on our event page.

This could be the year to build your dream Sports Car at home in your own garage?

The Zero is a constantly evolving to make it easier for the home builder to build in their very own garage workshop.  With our new build guide soon to be released and the support from the team it couldn't be easier to build your own sports car. The GBS Zero is available as both factory build and a self build assembly kit for you to make your very own sports cars.

Building a Zero will be to your very own individual specification with the enjoyment of the build continuing all the way through till its on the road for you to enjoy for many years on both the road and track. Below are just a few questions that we often get asked……

Can I try before I buy?
Yes come and have a test drive in our Zero demonstrator with one of the team. We have two demonstrators available a Ford Duratec and Mazda based Zero. - Contact us today to book your visit and test drive - Click here

Which kit do I go for?
There are several options to consider and every kit that we supply is different as customers have different budgets, specifications, options and requirements. So contact us to discuss or why not arrange a visit to see us then we can show you all the options and help advise on the best route for your Zero build.

Are any specialist tools required to build the car?
No, you should be able to build the Zero with a good general tool kit consisting of a range of spanners, sockets, drill etc there is no welding or cutting required. This is tool kit that we recommend that has a good range of tools for the build. - Visit www.kitspares.co.uk

Where can I buy spare parts and extra parts for my build?
All parts for the Zero build can be bought from our Kit Spares online shop. Kit Spares stock the full range of parts for the GBS Zero and a comprehensive range of parts and spares for many other kit car makes and models. If you can’t find what you are after on there please give us a call or come and visit the Kit Spares shop and showroom.

I live outside the UK, can I still purchase a Zero?
Yes, the Zero range is available in both right and left hand drive. The Zero has already been sold into France, Germany, Italy, Sweden, Portugal, Greece, Siberia, South Africa, Australia, America and Southern Ireland. Contact us for more details.

How do I register the car when its finished?
We offer support throughout your build including our IVA and registration service. Our workshop team offer an IVA Pre Check Service, Full IVA Service where we prepare and present your car to test, including all of the paperwork for both IVA and registration of your car. Visit our after sales page for more details on these services and others that we offer.

Is the Zero expensive to insure?
No, the Zero is remarkably cheap to insure considering their spec and performance. There are many specialist kit car insurance companies who offer a good price for insurance. (Price depends on status and history of driver).  Please click here for more details on the Insurance Companies we recommend and for our Dealer codes.

---

Not everyone can say they have built their own Sports Car…..

Take your time, look at the options that we offer, do some research and come and visit us and we will show you everything, answer all your questions then the fun starts and we can start planning your build with you. Please also visit our FAQ page for more answers that you might be looking for.
We look forward to welcoming you to GBS.

Pleased to welcome another University of Nottingham Student to join the GBS Team for a few months…..

We have been working for a while now with The University of Nottingham to offer Postgraduate placements for students and we are pleased to have been able to offer several Students placements opportunities here at GBS. Our recent student to join us earlier this year is Amir Ata Varaei who is currently studying Mechanical Engineering at the University of Nottingham, Amir has a strong background in engineering design and is here to work alongside our design and engineering team on a project to produce engineering and assembly drawings for our products from existing and new CAD drawings. This will give all products engineering drawings, illustrations and for the assembly procedures to aid customers and staff to build the car as well as for reference. Part of the project is to also look to produce image files from the drawings and work with our parts & ecommerce team to get the items on our website with the illustration drawings and product codes so we can grow our product range that is online through our Kit Spares website - www.kitspares.co.uk

Few words from Amir “It is an amazing place to work with highly supportive and friendly people. Richard the Director and Alex always point me in the right direction. I thoroughly enjoy spending time with them and working on CAD drawings and preparing models and can gain enormous experience from working with dedicated strong design team. I have always had a passion for mechanical engineering, Great British sport car is helping me to go above and beyond what is required.

If there will be opportunity I would prefer to get another placement here in GBS. In any case I can benefit from the great experience that I am getting from working here, and everywhere in the automotive industry.” Amir Varaei

We are continuing to work with the University of Nottingham and look forward to offering more student placement opportunities throughout the year.

Customers Zero Mazda Build progressing well....

We always like to hear from customers and see how their Zero Builds are going and we recently received some photographs and build update from GBS customer Marin Cordeaux and his wife Jane who collected their Zero Mazda Kit from us in October last year.

Martin said they ”Spent the first couple of weeks just getting familiar with the car and going over all the parts that we collected along with working through the wiring harness, brake pipes and fuel lines. We started with the differential and lifted that into place using the engine hoist which made the whole job a lot easier picking up on the locating point on the chassis. Once that was fitted we fitted the low pressure fuel pump and some of the associated hoses and fuel lines. We then moved onto the rear wishbones which then allowed us to fit the drive shafts and rear hubs. We located the prop shaft and made up a mounting bracket for the speedo pick up sensor.

So far so good, had a few technical questions which Matt from the GBS Workshop kindly resolved and we are progressing well to date”.

We look forward to following Martin and Janes Mazda Zero build and sharing their progress with you again later this year.

If you are near the completion of your Zero build and looking to get it IVA tested and registered then please see more details here about our IVA Service we offer for the Zeros and other sports cars.

Motorbike engine - Kawasaki 1400 GTR powered Zero leaves the GBS Workshop....

This Zero that we prepared and presented to IVA is now registered and is leaving the workshop this week. The Zero Custom self build option that we offer allows you to tailor the Zero to the engine configuration of your choice, whether that is an already compatible engine or a completely custom engine installation. Allowing you to customise the whole power train and other aspects of the car. This customers Zero build is powered by a Kawasaki 1400 GTR Motorbike engine, and will be enjoyed on both the road and track, see below more about the spec and performance.

Engine - Kawasaki 1400 GTR / 140bhp, 6 speed sequential gearbox, Fuel injected. / Controlled by Emerald K6 Ecu and Custom wiring harness / Quaife reverse Gearbox / Custom equal length 304L manifold / 2” stainless exhaust system with built in CAT / Accusump 3pint Oil accumulator and surge protection / Temp controlled Oil cooler / Custom shortened sump /
Custom Clutch with upgraded ZR1400 plates, and HD Springs / Drive system modified to accept prop shaft.

Zero Chassis - Lowered floor & cobra hoops / Custom Zero chassis adapted for bike engine, custom qualify gearbox mounts / Custom Proshaft / Full ATR spec, ATR Front end, ATR Rear upgrade, ATR Suspension. / Full Carbon pack / GBS Heated Seats / AIM MPS IVA compatible display, with additional sensors over Canbus from Ecu. / Momo Steering Wheel and Quick release boss / AEM Fuel / Air gauge / Custom Boot cover / Full wheel upgrade – Sparco 7x15 front and 8x15 rear / Painted kawasaki Purple.

We are pleased to have been awarded a project along with Q-Flow and other partners.....

Innovating together - Hydrogen and Value-Added-Carbon production through Waste Heat Recovery: Hy-Value Recovery.

We are proud to announce that an exciting project is now underway along with a consortium of businesses. This project will embed new manufacturing technology in the UK and contribute to decarbonisation of the Foundation Industries.
'Hydrogen and Value-Added-Carbon production through Waste-Heat-Recovery' (Hy-Value Recovery) will up-scale a manufacturing process for a sustainable, affordable, value-added-carbon product for the Foundation-Industry Chemicals sector through utilising high-grade waste-heat from steel/glass furnaces.

Q-Flo's Value-Added-Carbon product range, Torstran, is produced by high temperature processing of methane/hydrocarbon feedstocks including renewables/wastes (e.g. from land-fill, biogas, hot-steel reaction gases) to give a carbon nanotube product in a safe bundled structure.

Hy-Value Recovery' will develop / build / operate an industrially-relevant-scale Torstran-Production-Demonstrator, at Glass Futures pilot plant in St Helens, Merseyside, demonstrating continuous 24-7 operation at an industrially-relevant scale, producing large volumes of Torstran and pure hydrogen for evaluation within industrial, aerospace and automotive applications.

Tata Steel UK will evaluate integration with their operations, use of the hydrogen by-products as a process-gas in annealing ovens, and explore use of Torstran to add functionality to their products. University of Cambridge and Glass Futures will evaluate Torstran coatings on glass/steel. Almath Crucibles will evaluate Torstran-enhanced ceramics. Torstran has demonstrated excellent potential for electromagnetic interference (EMI) shielding and as a composite in reduced-weight electric vehicles. Great British Sports Cars and United Aerospace will lead further optimisation/ validation/ electric vehicle trials.

Martin Pick, Q-Flo - “The Hy-Value Recovery project is a tremendous boost to the development of this technology.  The project and its partners bring expertise, knowledge and resources which will be invaluable in helping us achieve our mission to scale the carbon nanotube production process and become key supply chain partners in exciting emergent markets. Innovation from University of Cambridge, along with support from Innovate UK, has been crucial to this and we are very pleased the manufacturing is now beginning in the UK”

Richard Hall, Great British Sportcars -  “Great British Sports Cars (GBS) are pleased to have been awarded this project along with Q-Flo and other partners and are very much looking forward to working with the Project members to develop these new applications and opportunities that we can demonstrate the processing and manufacturability of the material in novel real world applications.”

Rob Ireson, Innovation and Partnerships Manager at Glass Futures - "Glass Futures (GF) are delighted to be working with Q-flo on this project to develop new techniques for improving the efficiency of its Torstran manufacturing processes through the utilisation of the waste heat energy from industrial processes. We will host the technology at our pilot facility and demonstrate its continuous operation on our new 30T/day furnace to show how this can be applied to commercial glass furnaces. 

“We believe that the ultra-long carbon nanotube materials produced with this process have potential to add value to a range of applications and products manufactured within the Foundation Industries (FI), such as new conductive coatings and improved industrial abatement technologies. GF are very much looking forward to working with the Project team to develop and evaluate these new application opportunities and establish itself as a global centre for FI development”

The funding was provided through Innovate UK’s Transforming Foundation Industries challenge which is helping energy-intensive businesses to share expertise and come up with radical new innovations to help reduce their carbon footprint. It is part of UKRI’s Challenge fund which is bringing together the UK’s world-leading research base with our best businesses to transform how we live, work and move around.

Bruce Adderley, Innovate UK Challenge Director for the Transforming Foundation Industries Challenge, added:  “Underpinned by circular economy thinking, the Foundation Industries and their supply chain partners are bringing forward a range of new innovations as they move towards a sustainable competitive future. But these need to be demonstrated at scale if they are to be rapidly deployed in the UK and taken to international markets. That is why we are delighted to be able to support projects like Hy-Value Recovery that are up-scaling manufacturing processes to develop and evaluate new application opportunities that will significantly reduce the carbon footprint of foundation industries, create high-value jobs, and make it internationally competitive.”

The outcome for GBS in this project will be to produce a demonstrator vehicle showcasing the technology in the real world which will demonstrate the processing and manufacturability of the material in finish components.  This project is now underway and further updates will be shared later this year as the project develops.

The NEW MSA & FIA approved Zero Race Car.....

The new FIA Zero Race Car was seen for the very first time at the Autosport International Show at the NEC in Birmingham last month, and its now back in production for the build to continue and will soon be ready for some track days later this year.

For maximum safety and rigidity our Race chassis comes with a fully welded intergrated Roll Cage that is MSUK compliant or to full FIA Compliant spec. The custom Zero Race allows you to tailor the Zero to the engine and running gear configuration of your choice to suit the race series you are competing in, weather that is an already compatible engine or a completely custom engine installation. This allows you to customise and optimise every aspect of the car for ultimate performance and enjoyment.

The NEW 2023 Zero Race car specification can be seen below:
FIA Homologated Race Chassis, Painted Gloss White / Satin Black, 2.5 Duratec Engine / ATR throttles / Life ECU, Power options 200 - 350 bhp, 5 Speed gearbox / Quick shift, GRP Dash with AIMS Dash, Race Seats / TRS 6pt Harness, Momo Steering Wheel, Lightweight Floor & Bodywork, ATR Adjustable Suspension, ATR Brakes, Sports Race Fuel Tank & Swirl Pot, 4-2-1 Exhaust Manifold, Team Dynamics Wheels & Yokohama Tyres.
The Zero Race is ideal if you are looking for a track day car or a competition race car to compete at all levels. There are a range of optional extras and upgrades available along the way, so you will be building a truly individual race car that is unique and bespoke to you.

Chassis package prices start from £5,500, click here to see a short overview video and more details on the Zero Race Car.

Great to see the Zeros being enjoyed in all weathers all over the world....

We enjoy our Zero demonstrators all year and its great to see that many of you do too! GBS customer Jacob Dowling sent us these photographs of his Zero out in the countryside in the recent snow fall that we had in the UK. While over in USA GBS customers have been out enjoying their Zeros together meeting in Saratoga for a run up Highway 9 and 35.
Another GBS Zero self build kit was collected last week that is now on its way to the USA which is going to Seattle Washington, where the owner is looking forward to enjoying it on the beautiful Cascades mountain roads. Two more shipping crates are also expected to be with us later this week for more Zeros that we will be preparing that will be going to USA over the next few weeks.
There are now GBS Zero’s on the road or under construction in many USA states. Contact us if you are interested in a GBS Zero in North America and Click here for more details about the Zero Self Build options that we offer.

The first event of 2023 for the GBS Team was a great success….

It’s been a busy start to the year at GBS as we were straight into preparing for the first event on the GBS Calendar which was the Autosports International Show at the NEC in Birmingham. The event started on Thursday 12th until Sunday 15th January, it was great to be back there as it was 2019 since we were last there due to Covid. It was nice to see and catch up with so many customers over the 4 days as well as meet many new customers that we look forward to welcoming to the GBS Factory over the next few months.

We were based in Hall 3, where we had two very nice spec Zero’s on display. Including our new high spec Zero Race Car along with a Gen 2 factory built Zero that GBS Customer Robin Copley kindly let us have on display for the show. Both Zero’s attracted a lot of attention and we were also delighted to have Tri-Tech 3D join us on our stand. On display, along with the Zeros was one of the newest 3D printers from Stratasys – the F370CR. Built for robust applications and ideal for the Automotive industry, this industrial FDM printer 3D prints in ABS-CF10 and Nylon-CF10 materials – perfectly suited to supplement traditional fabrication technologies. Tri-Tech 3D also bought with them a host of 3D printed models & previous projects that attracted a lot attention including some components that were created and displayed on our Zero Race Car on our stand. We will share more details on them later this month.

The next event on the GBS Calander is our GBS Cars & Coffee event that is proudly sponsored by A-Plan Insurance which is happening on Saturday 18th March at GBS. Visit our events page for more details and to see what other events that we have planned for 2023, its updated regularly so keep checking.

The First GBS Cars & Coffee event of 2023 is announced......

Saturday 18th March

We are excited to share with you all that we have now confirmed the date for the first GBS Cars & Coffee event of 2023, which is proudly sponsored by A-Plan Insurance and will be taking place on Saturday 18th March at GBS from 10am-2pm.

Sponsored By

As many of you know everyone at GBS has a strong passion for cars and anything to do with motorsport and we love our Cars & Coffee events and Track Days etc and we all love to host our Cars & Coffee days which are getting busier and attracting a variety of sports cars each time we host one.

After working with A-Plan Insurance for several years now and promoting their Insurance services we are delighted that they are joining us again this year and will be sponsoring our first GBS Cars & Coffee event of 2023.

About A-Plan-
A-Plan has been providing a personalised service to over 600,000 clients since the 1960s. We have over 100 high street branches however, Thatcham branch is the specialist vehicle centre. It opened in 1994, focusing on private car, commercial vehicle and home insurance and offering an independent professional service with a dedicated in-house claims management team.

With a total of over 100 years of insurance experience in our Thatcham branch, the team are on hand to offer a professionally qualified personal service when you need it. Due to our enthusiasm for specialist vehicles, we have developed an experienced team dedicated to classic, kit, high performance and modified cars, as well as imported vehicles… and let’s not forget our track day cover!

We are proud to be associated with many car clubs and associated businesses within this specialist arena and we offer discounts and access to bespoke policies for car club members. So, if you own a specialist vehicle, or are thinking of buying one give us a try. To find out how competitive our prices are give us a call on 01635 874646 and we'll be delighted to discuss your needs. 
Great prices, great cover, great people - we're confident you'll agree!

The GBS Cars & Coffee event at GBS was created in 2016 and has since been a massive success & we have continued to hold the event again for several years. Its an event that we have created that gives the chance for you all to have a ride out in your sports cars / meeting point and enjoy a coffee (plus biscuits/ cake of course) and chat about your cars, all are welcome to join us in any car (modern or classic including bikes). Everyone is welcome to join us and this year we will have even more parking available!
Another great thing about our GBS Cars & Coffee events are that we raise more money for two great charities…. We collect for the Notts & Lincs Air Ambulance & Cancer Research, and will be collecting on the day. Refreshments are free and all we ask for is a donation to our chosen charities.

The Kit Spares shop and showroom ( www.kitspares.co.uk ) will be open on the day. Please feel free to call us or email and pre order and parts, ready to collect on the day to avoid any delays.

All of the GBS and A-Plan team look forward to seeing you and welcoming you to GBS on Saturday 18th March.

ALL CARS ARE WELCOME TO JOIN US…..

EXCITING NEWS – Great British Sports Cars is expanding

We are excited to share with you all that we are expanding, we are pleased to be doubling our site here in Nottinghamshire with the purchase of our premises and the adjoining site. 

Just before Christmas we got the keys and the team have now started all the hard work of preparing the building, this move will give us room to grow and expand our business and crucially allows us to bring all elements of our production under one roof. 

As well as bringing the team to one site and the extra space we are pleased to take this big step as a business as it will give us, our employees and our customers stability, given the current economic environment and the challenges and costs faced by business and all of us at the moment we are grateful to be able to ensure that our premises are stable for the future. 

We look forward to welcoming you to our growing facilities at our next cars and coffee event which we will be announcing next week and keep an eye out for factory tours later this year. We are also busy preparing the GBS Zeros for our first event of the year which is the Autosport International Show at the NEC in Birmingham which is happening next week where the Zeros will be on display including our new Zero Race car.

Happy New Year, stay safe & Best Wishes to you all.
Best Wishes From
Richard and All the GBS Team.

Happy Christmas to you all and best wishes for 2023.... From all the team at GBS

All of the GBS and Kit Spares  team would like to wish you and your families a very Happy Christmas, and also like to take this opportunity to say thank you all for your support this year.

After a successful and busy year, we are now looking forward to a continued busy & successful 2023 with many new and exciting plans ahead for us. We will be announcing some very exciting news in January.

But for now we are all looking forward to a well earned break and rest over the Christmas period and we look forward to seeing you all in the New Year. Don’t forget you can still follow us over the Christmas break on our social media channels for updates – Follow us on Facebook, Twitter and Instagram.

Happy Christmas Everyone & Stay Safe

Best Wishes From
Richard and all the GBS & Kit Spares Team.

---

GBS & Kit Spares Christmas & New Year Opening Times….
Both GBS and Kit Spares will be closed from Friday 23rd December and we will be open again and back to normal opening hours on Tuesday 3rd January 2023.

You can still place your orders online from our parts website Kit Spares but please note any orders placed after 23rd December 2022 may not be processed or dispatched until 3rd / 4th January 2023. www.kitspares.co.uk

Happy Christmas & Happy New Year

Tri Tech will be with us on our stand at the Autosport Show in January.....

Click here for more details about Tri-Tech and what they offer.

We are looking forward to being at this years Autosport’s Show in January and we are delighted that Tri-Tech 3D will be joining us on our stand.
On display, along with the Zeros including our new Zero Race car there will be one of the newest 3D printers from Stratasys – the F370CR. Built for robust applications and ideal for the Automotive industry, this industrial FDM printer 3D prints in ABS-CF10 and Nylon-CF10 materials – perfectly suited to supplement traditional fabrication technologies.
Not only will Tri-Tech 3D have the printer on the stand (printing live), they will also bring with them a host of 3D printed models & previous projects that are sure to make you stop and look.
We can be found with the Tri-Tech team in Hall 3 on Stand 3642 over the four days, follow us on our social media channels during the lead up to the show for more details of what will be on display on our stand.